GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2000 🢒 Alero 🢒 Body and Accessories 🢒 Wiring Systems 🢒 Ignition Coil Replacement

Removal Procedure
  1. Turn OFF the ignition.

    2. Object Number: 15977 Size: SH
  2. Remove the spark plug wires.
  3. Remove the screws securing the coils to the ignition control module.
  4. Remove the coils from the ignition control module.

Installation Procedure

    Object Number: 15977 Size: SH
  1. Install the coils to the ignition control module.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Reinstall the screws.

    3. Tighten
    Tighten the screws to 4-5 N·m (40 lb in).

  3. Connect the spark plug wires.