Did you perform the Tire Inflation Monitoring System Diagnostic System Check?

Go to Step 2

Go to Diagnostic System Check - Tire Inflation Monitoring

Did you perform the Tire Inflation Monitoring Reset Procedure and System Re-learn Process test drive?

Go to Step 3

Go to Tire Inflation Monitor Resetting

1. Lower the tire pressure of one tire by 15 psi.
2. Connect a scan tool.
3. Select TIM Data from the Data Display menu on the scan tool.
4. Drive the vehicle for about 25 minutes on a smooth, straight, paved road at a constant speed above 15 MPH.
5. View the Low Tire Pressure data.

Is the LOW TIRE PRESSURE Warning ON?

Go to Step 5

Go to Step 4

Replace the EBCM. Refer to Electronic Brake Control Module Replacement in Antilock Brakes.

Did you complete the repair?

Go to Diagnostic System Check - Tire Inflation Monitoring

--

Replace the Instrument Cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console.

Did you complete the repair?

Go to Diagnostic System Check - Tire Inflation Monitoring

--