For 1990-2009 cars only
Circuit Description
The Body Control Module (BCM) is connected to the Remote Control Door Lock Receiver by the keyless entry serial data circuit. This circuit is the link for communication between the two modules. The BCM checks each message received from the Remote Control Door Lock Receiver for validity (Parity).
Conditions for Running the DTC
The DTC can run at any time.
Conditions for Setting the DTC
The Body Control Module (BCM) detects an invalid message.
Action Taken When the DTC Sets
The BCM stores DTC B2806 in memory.
Conditions for Clearing the DTC
| • | The condition for setting the DTC is no longer present and the scan tool Clear DTCs function is used. |
| • | The BCM automatically clears the history DTC when a current DTC is not detected in 100 consecutive drive cycles. |
Diagnostic Aids
| • | Thoroughly inspect the wiring and the connectors. An incomplete inspection of the wiring and the connectors may result in a misdiagnosis, causing a part replacement with a reappearance of the malfunction. |
| • | If an intermittent malfunction exists, refer to Testing for Intermittent Conditions and Poor Connections in Wiring Systems. |
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Remote Keyless Entry Diagnostic System Check? | -- | Go to Step 2 | |
2 | Replace the Remote Control Door Lock Receiver. Refer to Receiver Replacement . Did you complete the replacement? | -- | System OK | -- |
