GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
  2. Pull back the rear compartment trim from the right rear corner in order to expose the quarter outer panel pressure relief valve.

  3. Object Number: 276546  Size: SH
  4. Remove the quarter outer panel pressure relief valve (1).
  5. Disengage the tabs from the inside of the rear compartment.

Installation Procedure


    Object Number: 276546  Size: SH
  1. Install the pressure relief valve (1) by sliding the valve into the opening and engaging the tabs.
  2. Fully engage the retaining tabs.

  3. Install the rear compartment trim.
  4. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .