Removal Procedure
- Remove the retaining screws
from the lower steering column trim cover (3).
- Remove the upper column trim cover (1) tilting up and unsnapping
from the lower column trim cover hinges (3).
- Remove the tilt lever. Refer to
Tilt Lever Replacement
.
- Remove the lower column trim cover (3) from the steering
column (2).
Installation Procedure
- Install the lower column
trim cover (3) to the steering column (2).
- Install the tilt lever. Refer to
Tilt Lever Replacement
.
- Install the upper column trim cover (1) to the steering
column (2).
Notice: Refer to Fastener Notice in the Preface section.
- Install the retaining screws to the lower steering column trim cover (3).
Tighten
Tighten the screws to 2 N·m (18 lb in).