Removal Procedure
- Remove the washer solvent from the washer solvent container.
- Remove the left front fender liner. Refer to
Front Fender Liner Replacement
in Body Front End.
- Disconnect the washer pump electrical
connector.
- Disconnect the washer hose.
- Using a small flat-bladed tool, remove the washer pump from the
washer solvent container.
- Using a small flat-bladed tool, remove the seal from the washer
solvent container.
Installation Procedure
- Position the seal to the
washer solvent container pressing in until fully seated.
- Position the washer pump to the washer solvent container pressing
in until fully seated.
- Connect the washer hose.
- Connect the washer pump electrical connector.
- Install the left front fender liner. Refer to
Front Fender Liner Replacement
in Body Front End.
- Fill the washer solvent container with washer solvent.