| • | Synchronization may be necessary due to the security method
used by the remote keyless entry system. |
| | The transmitter does not send the same signal twice to the remote control door
lock receiver (RCDLR). |
| • | The RCDLR will not respond to a signal that has been sent previously. |
| | This prevents anyone from recording and playing back the signal from the transmitter. |
| • | Synchronization may be necessary under the following conditions: |
| - | The battery in the transmitter is very weak. |
| - | The battery in the transmitter was replaced. |
| - | The battery in the vehicle has been in a low or no charge condition for
an extended period of time. |
In order to synchronize the transmitter with the RCDLR, perform the following
steps:
- Stand within 1.5 m (5 ft) from the vehicle.
- Simultaneously press and hold the LOCK and UNLOCK buttons on the transmitter
for 7 seconds.
The horn should chirp in order to confirm synchronization.
