Removal Procedure
- Remove the rear compartment lamp housing for access. Refer to
Rear Compartment Courtesy Lamp Replacement
in Lighting
Systems.
- Look for the mounting
tabs just to the right of the center access hole on the rear package shelf.
Compress the tabs and slide the receiver down through the access hole.
- Disconnect the electrical connector from the remote door lock
receiver.
- Remove the remote door lock receiver.
Installation Procedure
- Connect the electrical connector.
- Install the receiver through
the access hole. Snap the mounting tabs into place.
- Install the rear compartment lamp housing. Refer to
Rear Compartment Courtesy Lamp Replacement
in Lighting
Systems.
- Reprogram the new receiver to transmitters. Refer to
Transmitter Programming
.