Removal Procedure
- Remove the lower trim panel from the center
pillar. Refer to
Center Pillar Lower Trim Panel Replacement
.
- Pull out the door weatherstrips as required.
- Remove the shoulder belt guide cover.
- Remove the shoulder belt guide bolt.
- Use a flat-bladed tool to remove the clips from the upper trim panel (1)
on the center pillar.
Installation Procedure
- Align the retaining clips on the trim panel (1)
to the center pillar.
- Press in to secure the retaining clips.
Notice: Refer to Fastener Notice in the Preface section.
- Install the shoulder belt bolt.
Tighten
Tighten the bolt to 28 N·m (21 lb ft).
- Install the shoulder belt guide cover.
- Install the lower trim panel to the center pillar. Refer to
Center Pillar Lower Trim Panel Replacement
.
- Install the door weatherstrips.