Evaporative Emission Canister Hoses for Oldsmobile Aurora 1997

Notice: Do Not attempt to repair the EVAP pipes or the connecting hoses. Replace the damaged EVAP pipes or the connecting hoses are damaged. If the nylon EVAP pipe becomes kinked and cannot be straightened, it must be replaced.

1. Remove the hardware retaining the EVAP pipe.
2. Note the location of the attaching hardware for installation.
3. Remove the EVAP pipe.
4. Inspect the hoses for cuts, swelling, cracks and distortion. Replace the hoses as required.
5. Inspect the pipes for bends, kinks and cracks. Replace the pipes as required.

Notice: Properly secure the EVAP pipe in order to prevent chafing of the pipe.

Important: Route the replacement EVAP pipe in the same manner as the original EVAP pipe was routed.

1. Install the EVAP pipe.
2. Install the hardware retaining the EVAP pipe.