Radiator Inlet Hose Replacement LX5

Tools Required

J 38185 Hose Clamp Pliers

1. Drain the cooling system. Refer to Cooling System Draining and Filling .



2. Position the J 38185 to the clamp in order to remove the inlet radiator hose (2) from the water housing crossover.



3. Position the J 38185 to the clamp in order to remove the inlet radiator hose from the radiator.

1. Position the J 38185 to the clamp in order to connect the inlet radiator hose to the radiator.



2. Position the J 38185 to the clamp in order to connect the inlet radiator hose (2) to the water housing crossover.
3. Fill the cooling system. Refer to Cooling System Draining and Filling .

Radiator Inlet Hose Replacement L47

Tools Required

J 38185 Hose Clamp Pliers

1. Drain the coolant. Refer to Cooling System Draining and Filling .



2. Using the J 38185 loosen and move the inlet radiator hose clamp (1)
3. Remove the inlet radiator hose from the radiator.



4. Using the J 38185 loosen and move the inlet radiator hose clamp at the engine.
5. Remove the inlet radiator hose from the engine.
6. Disconnect the hose clip (1) at the upper radiator support bar and remove the hose.

1. Install the inlet radiator hose to the engine.
2. Using the J 38185 install the inlet radiator hose clamp at the engine.
3. Position the hose and fasten to the clamp (1) at the upper radiator support.



4. Install the inlet radiator hose to the radiator.
5. Using the J 38185 install the inlet radiator hose clamp (1) at the radiator.
6. Fill the cooling system. Refer to Cooling System Draining and Filling .