GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2001 🢒 Aurora 🢒 Engine 🢒 Engine Electrical 🢒 Dash Integration Module Replacement

Removal Procedure
  1. Before replacing the Dash Integration Module (DIM), record the personaization settings to transfer to the new module (if they are available).
  2. Remove the right closeout/ insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gages and Console.

    3. Object Number: 473673 Size: SH
  3. Remove the DIM from the bracket by releasing the tab behind the module.
  4. Disconnect the electrical connectors (1) from the DIM (2).

Installation Procedure

    Object Number: 473673 Size: SH
  1. Connect the electrical connectors (1) to the DIM (2).
  2. Install the Dash Integration Module (DIM) into the bracket.
  3. Install the right closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gages and Console.
  4. Reprogram the DIM. Refer to Body Control Module (BCM) Programming/RPO Configuration .