For 1990-2009 cars only
8 Digit GM Part Number: The scan tool displays the controller
part number for service identification.
Accum Fault-- Compressor: Defined period of time the compressor is active with out an exhaust cycle.
Accum Fault-- Exhaust: Defined period of time that the exhaust is active with out a compressor cycle.
ALC Compressor Active: Indicates when the compressor is running.
ALC Exhaust Solenoid Active: Indicates when the exhaust solenoid is on.
Battery Low-Compressor: This indicates when there is low voltage at compressor.
Calibration ID: This number designates the modules calibration.
Component Serial No. 8-11: The scan tool displays an alphanumeric number. Display indicates digits 8 to 11 of the component serial number of the control module.
Component Serial No. 12: The scan tool displays an alphanumeric number. Display indicates digit 12 of the component serial number of the control module.
Component Serial No. 13-16: The scan tool displays an alphanumeric number. Display indicates digits 13 to 16 of the component serial number of the control module.
Component Serial No. 17-18: The scan tool displays an alphanumeric number. Display indicates digits 17 to 18 of the component serial number of the control module.
Filtered Position Valve: As the vehicle operates the suspension position sensor is monitored, and the information is filtered, to the RIM so it can adjust the suspension.
Julian Date of Build: The scan tool displays year and day. The first digit indicates the last digit of the year that the RIM was built. The remaining three digits indicate the day of the year that the RIM was built.
Leveling Sensor Feed: Voltage feed to the suspension position sensor.
Progress Fault-- Compressor: Defined period of time the that the compressor is active , and a change is not detected by the sensor .
Progress Fault--Exhaust: Defined period of time that the exhaust is active and no change is detected at the sensor.
Prom ID: The modules internal "PROM" identifier.
Suspension Position Sensor: Indicates the sensor signal voltage to the control module.
Trim Value: A value programed in the RIM
Year Module Built: The scan tool displays the year the RIM was built.
Accum Fault-- Compressor: Defined period of time the compressor is active with out an exhaust cycle.
Accum Fault-- Exhaust: Defined period of time that the exhaust is active with out a compressor cycle.
ALC Compressor Active: Indicates when the compressor is running.
ALC Exhaust Solenoid Active: Indicates when the exhaust solenoid is on.
Battery Low-Compressor: This indicates when there is low voltage at compressor.
Calibration ID: This number designates the modules calibration.
Component Serial No. 8-11: The scan tool displays an alphanumeric number. Display indicates digits 8 to 11 of the component serial number of the control module.
Component Serial No. 12: The scan tool displays an alphanumeric number. Display indicates digit 12 of the component serial number of the control module.
Component Serial No. 13-16: The scan tool displays an alphanumeric number. Display indicates digits 13 to 16 of the component serial number of the control module.
Component Serial No. 17-18: The scan tool displays an alphanumeric number. Display indicates digits 17 to 18 of the component serial number of the control module.
Filtered Position Valve: As the vehicle operates the suspension position sensor is monitored, and the information is filtered, to the RIM so it can adjust the suspension.
Julian Date of Build: The scan tool displays year and day. The first digit indicates the last digit of the year that the RIM was built. The remaining three digits indicate the day of the year that the RIM was built.
Leveling Sensor Feed: Voltage feed to the suspension position sensor.
Progress Fault-- Compressor: Defined period of time the that the compressor is active , and a change is not detected by the sensor .
Progress Fault--Exhaust: Defined period of time that the exhaust is active and no change is detected at the sensor.
Prom ID: The modules internal "PROM" identifier.
Suspension Position Sensor: Indicates the sensor signal voltage to the control module.
Trim Value: A value programed in the RIM
Year Module Built: The scan tool displays the year the RIM was built.
