Removal Procedure
- Raise the vehicle and
support. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Pull down on the intermediate park brake cable (2) near
the park brake connector (1).
- Remove the intermediate park brake cable (2) from the park
brake cable connector (1).
- Disconnect the intermediate
cable (3) from the rear equalizer (1).
- Disconnect the intermediate park brake cable housing from the
rear park brake cable housing connector.
- Remove the intermediate park brake cable.
Installation Procedure
- Route and install the
intermediate park cable into park brake cable connector.
- Connect the left (2) and right (5) rear park brake
cables to the intermediate park brake cable (3), using the equalizer (1).
- Install the intermediate park brake cable (3) to the equalizer (1).
- Insert the intermediate
park brake cable (2) into the park brake cable connector (1)
and lock the cable into place.