Notice: Refer to Servicing and Replacing Seat Belts Notice in the Preface section.

1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.



2. Remove the center rear seat belt anchor fastener.
3. Slide the center rear seat belt anchor plate out from under the rear seat back hold-down.
4. Remove the center rear seat belt from the vehicle.

1. Install the center rear seat belt anchor plate under the rear seat back hold-down.
2. Ensure the center rear shoulder belt is not twisted.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Important: Assure that the fastener threads and fastener hole are free of any sealer patch material.

3. Install the center rear seat belt anchor fastener.

Tighten
Tighten the center rear seat belt anchor fastener to 41 N·m (32 lb ft).

4. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.