GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2001 🢒 Aurora 🢒 Restraints 🢒 SIR 🢒 Bucket Seat Replacement

Removal Procedure

    Caution: When you are performing service on or near the SIR components or the SIR wiring, you must disable the SIR system. Refer to Disabling the SIR System. Failure to follow the correct procedure could cause air bag deployment, personal injury, or unnecessary SIR system repairs.

  1. Disable the SIR system. Refer to Disabling the SIR System in SIR.
  2. Move the seat to the full forward position.

    3. Object Number: 291625 Size: SH
  3. Remove the seat track fastener trim cover on the inboard seat track.

    4. Object Number: 469175 Size: SH
  4. Remove the seat track retainer bolts securing the seat to the vehicle.
  5. Move the seat to the full rearward position.

    6. Object Number: 470256 Size: SH
  6. Remove the front seat track fastener trim covers.

    7. Object Number: 670307 Size: SH
  7. Remove the front seat track bolts securing the seat to the vehicle.

    8. Object Number: 470257 Size: SH
  8. With the seat slightly tilted forward, disconnect the electrical connectors.
  9. With the aid of an assistant, remove the seat from the vehicle.

Installation Procedure
  1. With the aid of an assistant, install the seat into the vehicle.

    2. Object Number: 470257 Size: SH
  2. With the seat tilted slightly forward, connect the electrical connectors.

    3. Object Number: 469175 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Lower the rear of the seat and install the track retainer fasteners in order to secure the rear of the seat to the vehicle.

    4. Tighten
    Tighten the seat track retainer fasteners to 41 N·m (31 lb ft).


    Object Number: 291625 Size: SH
  4. Install the seat fastener trim cover.
  5. Position the seat to the full rearward position.

    6. Object Number: 670307 Size: SH
  6. Install the seat retainer fasteners in order to secure the front of the seat to the vehicle.

    7. Tighten
    Tighten the seat track retainer fasteners to 41 N·m (31 lb ft).


    Object Number: 470256 Size: SH
  7. Install the seat track retainer fastener trim covers.
  8. Reposition the seat.
  9. Enable the SIR system. Refer to Enabling the SIR System in SIR.