Removal Procedure
- Open the rear compartment.
- Remove the right side rear compartment trim. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.
- Remove the fasteners securing the CD mounting bracket to the rear compartment.
- Disconnect the electrical connector from the remote CD player.
- Remove the fasteners securing the remote CD player to mounting bracket.
- Separate the remote CD player from the bracket.
Installation Procedure
- Position the CD player into the mounting bracket.
- Install the fasteners in order to secure the CD player to the bracket.
- Position the CD player and bracket into the rear compartment.
- Connect the electrical connectors.
- Install the fasteners in order to secure the rear compartment CD player and bracket to the vehicle.
- Install the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.
- Close the rear compartment deck lid.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the fasteners to 2 N·m (18 lb in).
Tighten
Tighten the rear compartment CD player bracket fasteners to 9 N·m
(80 lb in).
