GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2001 🢒 Aurora 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Console Tray Insert Replacement

Removal Procedure
  1. Remove the IP center trim panel. Refer to Instrument Panel Center Trim Panel Replacement .
  2. Remove the console trim plate. Refer to Console Trim Plate Replacement .

    3. Object Number: 497552 Size: SH
  3. Remove the fasteners from the compartment assembly to the IP.
  4. Remove the compartment assembly by pulling rearward.
  5. Disconnect the electrical connector from the cigar lighter.

Installation Procedure

    Object Number: 497552 Size: SH
  1. Connect the electrical connector to the cigar lighter.
  2. Install the compartment into the IP by sliding forward into the IP.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the compartment to IP fasteners.

    4. Tighten
    Tighten the fasteners to 1.4 N·m (12 lb in).

  4. Install the console trim plate. Refer to Console Trim Plate Replacement .
  5. Install the IP center trim panel. Refer to Instrument Panel Center Trim Panel Replacement .