GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Open the rear compartment.
  2. Remove the right side rear compartment trim. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.

  3. Object Number: 428741  Size: SH
  4. Remove the fasteners securing the CD mounting bracket to the rear compartment.
  5. Disconnect the electrical connector from the remote CD player.

  6. Object Number: 428738  Size: SH
  7. Remove the fasteners securing the remote CD player to mounting bracket.
  8. Separate the remote CD player from the bracket.

Installation Procedure


    Object Number: 428738  Size: SH
  1. Position the CD player into the mounting bracket.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the fasteners in order to secure the CD player to the bracket.
  4. Tighten
    Tighten the fasteners to 2 N·m (18 lb in).


    Object Number: 428741  Size: SH
  5. Position the CD player and bracket into the rear compartment.
  6. Connect the electrical connectors.
  7. Install the fasteners in order to secure the rear compartment CD player and bracket to the vehicle.
  8. Tighten
    Tighten the rear compartment CD player bracket fasteners to 9 N·m (80 lb in).

  9. Install the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.
  10. Close the rear compartment deck lid.