Theft Deterrent Module Replacement for Oldsmobile Aurora 2001

1. Remove the Instrument Panel Trim Plate Bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gauges and Console.



2. Disconnect the theft deterrent module electrical connector (1).
3. Release the retainer clip (2) securing the theft deterrent module (3).



4. Slide the theft deterrent module upward out of the Instrument panel retainer.

1. Position the theft deterrent module to the opening in the IP retainer.



2. Push the theft deterrent module (3) downward until the retainer clip (2) engages, securing the module to the IP retainer.
3. Connect the theft deterrent module electrical connector (1).
4. Install the Instrument Panel Trim Plate Bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gauges and Console.
5. Perform the Programing Theft Deterrent System Components procedure. Refer to Programming Theft Deterrent System Components .