GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2001 🢒 Aurora 🢒 Body and Accessories 🢒 Interior Trim 🢒 Assist Handle Replacement

Removal Procedure

    Object Number: 421870 Size: SH
  1. Disengage the assist handle end cap covers (2).
  2. Remove the fasteners (1) from the assist handle (3).
  3. Remove the handle assembly.

Installation Procedure

    Object Number: 421870 Size: SH
  1. Position the assist handle (3) in the headliner.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the fasteners (1) in order to secure the assist handle.

    3. Tighten
    Tighten the fasteners to 3 N·m (27 lb in).

  3. Snap the end cap covers (2) into position.