1. Remove the caliper. Refer to Front Brake Caliper Replacement .
2. Remove the brake pads from the brake caliper bracket.



3. Remove the brake caliper bracket bolts (1).
4. Remove the brake caliper bracket.

Important:  Apply a few drops of GM Loctite™ or equivalent to the threads of the brake caliper bracket bolts before installing or replace the bolts with new pre-coated bolts.

1. Install the brake caliper bracket to the steering knuckle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the brake caliper bracket bolts (1).

Tighten
Tighten the brake caliper bracket bolts to 185 N·m (137 lb ft).

3. Install the brake caliper. Refer to Front Brake Caliper Replacement .