Tools Required

J 43442 Flywheel Holder

Important: Engine flywheel and crankshaft rear oil seal removal requires adequate space for removal. Mount the engine on a suitable engine stand which will properly space the engine in order to use the J 42841-A to remove the crankshaft rear oil seal. If necessary remove the engine flywheel and crankshaft rear oil seal with the engine properly supported on the floor or on a bench.

1. Remove the J 43442 , turn around and install the J 43442 .
2. Loosen the eight engine flywheel bolts.
3. Remove seven of the eight engine flywheel bolts leaving one bolt at the top of the crankshaft rotation.



4. Remove the J 43442 .




Important: Do not drop the engine flywheel when removing the final bolt.

5. Grip the engine flywheel and remove the remaining bolt.