Tools Required

1. Install the J 43442 .



2. Loosen the crankshaft balancer bolt.



3. Remove the crankshaft balancer bolt.



4. Place the J 43010 in position on the nose of the crankshaft in order to use the J 41816 .



5. Mount the legs of the J 41816 into the recesses cast into the backside of the crankshaft balancer inner hub.



6. Tighten the center screw on the J 41816 until the crankshaft balancer pulls clear of the crankshaft end.
7. Remove the crankshaft balancer.



8. Remove the drive belt tensioner pulley bolt.
9. Remove the drive belt tensioner from the cylinder head (1).