Thread Repair Specifications. Oldsmobile Aurora 2001

For 1990-2009 cars only

Makes 🢒 Oldsmobile 🢒 2001 🢒 Aurora 🢒 Engine 🢒 Engine Mechanical - 3.5L 🢒 Thread Repair Specifications

Table 1:	Left Cylinder Head Camshaft Cover Face
Table 2:	Left Cylinder Head Front Face
Table 3:	Left Cylinder Head Intake Face
Table 4:	Left Cylinder Head Exhaust Face
Table 5:	Left Cylinder Head Exhaust Face with A.I.R.
Table 6:	Left Cylinder Head Rear Face
Table 7:	Right Cylinder Head Camshaft Cover Face
Table 8:	Right Cylinder Head Front Face
Table 9:	Right Cylinder Head Intake Face
Table 10:	Right Cylinder Head Exhaust Face
Table 11:	Right Cylinder Head Exhaust Face with A.I.R.
Table 12:	Right Cylinder Head Rear Face
Table 13:	Engine Block Front
Table 14:	Engine Block Left Side
Table 15:	Engine Block Right Side
Table 16:	Engine Block Rear
Table 17:	Engine Block Top
Table 18:	Engine Block Left Deck Face
Table 19:	Engine Block Right Deck Face
Table 20:	Engine Block Lower Face
Table 21:	Lower Crankcase Pan Face

Left Cylinder Head Camshaft Cover Face

Left Cylinder Head Camshaft Cover Face

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M6 x 1.0	201	202	N/R	203	204	205	22	0.866	18	0.709	CF 222
2	M6 x 1.0	608	N/R	N/R	203	204	205	28	1.102	24	0.945	CF 240
3	M6 x 1.0	201	202	N/R	203	204	205	THRU		THRU		CF 225
4	M6 x 1.0	608	N/R	N/R	203	204	205	28	1.102	24	0.945	CF 245
5	M6 x 1.0	608	N/R	N/R	203	204	205	28	1.102	24	0.945	CF 244
6	M6 x 1.0	608	N/R	N/R	203	204	205	28	1.102	24	0.945	CF 249
7	M6 x 1.0	608	N/R	N/R	203	204	205	28	1.102	24	0.945	CF 248
8	M6 x 1.0	201	202	N/R	203	204	205	THRU		THRU		CF 223
9	M6 x 1.0	608	N/R	N/R	203	204	205	28	1.102	24	0.945	CF 253
10	M6 x 1.0	608	N/R	N/R	203	204	205	28	1.102	24	0.945	CF 252
11	M6 x 1.0	201	202	N/R	203	204	205	THRU		THRU		CF 220
12	M6 x 1.0	608	N/R	N/R	203	204	205	28	1.102	24	0.945	CF 254
13	M6 x 1.0	608	N/R	N/R	203	204	205	28	1.102	24	0.945	CF 255
14	M6 x 1.0	201	202	N/R	203	204	205	22	0.866	18	0.709	CF 224
15	M6 x 1.0	608	N/R	N/R	203	204	205	28	1.102	24	0.945	CF 250
16	M6 x 1.0	608	N/R	N/R	203	204	205	28	1.102	24	0.945	CF 251
17	M6 x 1.0	608	N/R	N/R	203	204	205	28	1.102	24	0.945	CF 246
18	M6 x 1.0	608	N/R	N/R	203	204	205	28	1.102	24	0.945	CF 247
19	M6 x 1.0	201	202	N/R	203	204	205	22	0.866	18	0.709	CF 226
20	M6 x 1.0	608	N/R	N/R	203	204	205	28	1.102	24	0.945	CF 241
21	M6 x 1.0	201	202	N/R	203	204	205	THRU		THRU		CF 201
22	M6 x 1.0	608	N/R	N/R	203	204	205	28	1.102	24	0.945	CF 242
23	M6 x 1.0	608	N/R	N/R	203	204	205	28	1.102	24	0.945	CF 243
24	M6 x 1.0	201	202	N/R	203	204	205	THRU		THRU		CF 200
25	M6 x 1.0	201	202	N/R	203	204	205	22	0.866	18	0.709	CF 221

Left Cylinder Head Front Face

Left Cylinder Head Front Face

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M10 x 1.5	211	212	N/R	213	214	215	THRU		26	1.024	FF 203
2	No Service - Manufacturing Use Only									N/A
3	M8 x 1.25	610	N/R	619	208	209	620	THRU		THRU		FF 201
4	M6 x 1.0	201	202	N/R	203	204	205	22	0.866	18	0.709	FF 208
5	M10 x 1.5	211	212	N/R	213	214	215	THRU		26	1.024	FF 206
6	M6 x 1.0	201	202	N/R	203	204	205	22	0.866	18	0.709	FF 209
7	M10 x 1.5	211	212	N/R	213	214	215	THRU		26	1.024	FF 205
8	No Service - Manufacturing Use Only									N/A
9	M8 x 1.25	610	N/R	619	208	209	620	27	1.063	22	0.866	FF 200
10	M8 x 1.25	206	207	N/R	208	209	210	27	1.063	22	0.866	FF 204

Left Cylinder Head Intake Face

Left Cylinder Head Intake Face

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M6 x 1.0	201	202	N/R	203	204	205	22	0.866	18	0.709	IF 204
2	M6 x 1.0	201	202	N/R	203	204	205	22	0.866	18	0.709	IF 203
3	M6 x 1.0	201	202	N/R	203	204	205	22	0.866	18	0.709	IF 202
4	M6 x 1.0	201	202	N/R	203	204	205	22	0.866	18	0.709	IF 201

Left Cylinder Head Exhaust Face

Left Cylinder Head Exhaust Face

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M10 x 1.5	211	212	N/A	213	214	215	32	1.250	26	1.024	EF 220
2	M16 x 1.5	No Service Tools Available						22	0.866	16	0.630	EF 200
3	M10 x 1.5	211	212	N/A	213	214	215	32	1.250	26	1.024	EF 221
4	M8 Bore	No Service - Not Threaded						8	0.315	N/A		EF 234
5	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 209
6	M6 x 1.0	201	202	N/A	203	204	205	22	0.866	18	0.709	EF 227
7	M8 Bore	No Service - Not Threaded						8	0.315	N/A		EF 233
8	M10 Bore	No Service - Not Threaded						10.7	0.421	N/A		EF 242
9	M6 x 1.0	201	202	N/A	203	204	205	22	0.866	18	0.709	EF 240
10	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 215
11	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 214
12	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 213
13	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 212
14	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 208
15	M10 Bore	No Service - Not Threaded						10.7	0.421	N/A		EF 243

Left Cylinder Head Exhaust Face with A.I.R.

Left Cylinder Head Exhaust Face with A.I.R.

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M10 x 1.5	211	212	N/A	213	214	215	32	1.260	26	1.024	EF 220
2	M16 x 1.5	No Service - Not Threaded						22	0.866	16	0.630	EF 200
3	M10 x 1.5	211	212	N/A	213	214	215	32	1.260	26	1.024	EF 221
4	M8 Bore	No Service - Not Threaded						8	0.315	N/A		EF 234
5	M6 x 1.0	201	202	N/A	203	204	205	22	0.866	18	0.709	EF 229
6	M8 Bore	No Service - Not Threaded						51.4	2.024	N/A		EF 232
7	M6 x 1.0	201	202	N/A	203	204	205	22	0.866	18	0.709	EF 228
8	M6 x 1.0	201	202	N/A	203	204	205	22	0.866	18	0.709	EF 227
9	M8 Bore	No Service - Not Threaded						51.4	2.024	N/A		EF 231
10	M6 x 1.0	201	202	N/A	203	204	205	22	0.866	18	0.709	EF 226
11	M8 Bore	No Service - Not Threaded						8	0.315	N/A		EF 233
12	M8 Bore	No Service - Not Threaded						51.4	2.024	N/A		EF 230
13	M6 x 1.0	201	202	N/A	203	204	205	22	0.866	18	0.709	EF 225
14	M10 Bore	No Service - Not Threaded						10.7	0.421	N/A		EF 242
15	M6 x 1.0	201	202	N/A	203	204	205	22	0.866	18	0.709	EF 240
16	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 215
17	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 214
18	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 213
19	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 212
20	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 209
21	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 208
22	M10 Bore	No Service - Not Threaded						10.7	0.421	N/A		EF 243

Left Cylinder Head Rear Face

Left Cylinder Head Rear Face

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M10 x 1.5	211	212	N/A	213	214	215	32	1.260	26	1.024	RF 211
2	M16 x 1.5	No Service Tools Available						22	0.866	16	0.630	RF 202
3	M10 x 1.5	211	212	N/A	213	214	215	32	1.260	26	1.024	RF 212
4	No Service - Manufacturing Use Only
5	M16 x 1.5	No Service Tools Available						22	0.866	16	0.630	RF 201
6	M10 x 1.5	211	212	N/A	213	214	215	32	1.260	26	1.024	RF 210
7	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	RF 205
8	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	RF 206
9	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	RF 207
10	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	RF 208
11	No Service - Manufacturing Use Only
12	M31.84 Bore	No Service - Not Threaded						THRU		N/A		RF 203
13	M10 x 1.5	211	212	N/A	213	214	215	32	1.260	26	1.024	RF 209

Right Cylinder Head Camshaft Cover Face

Right Cylinder Head Camshaft Cover Face

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M6 x 1.0	608	N/A	N/A	203	204	205	28	1.102	24	0.945	CF 244
2	M6 x 1.0	608	N/A	N/A	203	204	205	28	1.102	24	0.945	CF 245
3	M6 x 1.0	201	202	N/A	203	204	205	THRU		THRU		CF 207
4	M6 x 1.0	608	N/A	N/A	203	204	205	28	1.102	24	0.945	CF 248
5	M6 x 1.0	608	N/A	N/A	203	204	205	28	1.102	24	0.945	CF 249
6	M6 x 1.0	608	N/A	N/A	203	204	205	28	1.102	24	0.945	CF 252
7	M6 x 1.0	608	N/A	N/A	203	204	205	28	1.102	24	0.945	CF 253
8	M6 x 1.0	201	202	N/A	203	204	205	THRU		THRU		CF 206
9	M6 x 1.0	201	202	N/A	203	204	205	22	0.866	18	0.709	CF 228
10	M6 x 1.0	608	N/A	N/A	203	204	205	28	1.102	24	0.945	CF 256
11	M6 x 1.0	608	N/A	N/A	203	204	205	28	1.102	24	0.945	CF 257
12	M6 x 1.0	201	202	N/A	203	204	205	THRU		THRU		CF 202
13	M6 x 1.0	201	202	N/A	203	204	205	THRU		THRU		CF 203
14	M6 x 1.0	608	N/A	N/A	203	204	205	28	1.102	24	0.945	CF 258
15	M6 x 1.0	201	202	N/A	203	204	205	22	0.866	18	0.709	CF 229
16	M6 x 1.0	608	N/A	N/A	203	204	205	28	1.102	24	0.945	CF 259
17	M6 x 1.0	608	N/A	N/A	203	204	205	28	1.102	24	0.945	CF 254
18	M6 x 1.0	608	N/A	N/A	203	204	205	28	1.102	24	0.945	CF 255
19	M6 x 1.0	201	202	N/A	203	204	205	22	0.866	18	0.709	CF 224
20	M6 x 1.0	608	N/A	N/A	203	204	205	28	1.102	24	0.945	CF 250
21	M6 x 1.0	608	N/A	N/A	203	204	205	28	1.102	24	0.945	CF 251
22	M6 x 1.0	608	N/A	N/A	203	204	205	28	1.102	24	0.945	CF 246
23	M6 x 1.0	608	N/A	N/A	203	204	205	28	1.102	24	0.945	CF 247
24	M6 x 1.0	201	202	N/A	203	204	205	22	0.866	18	0.709	CF 226
25	M6 x 1.0	201	202	N/A	203	204	205	THRU		THRU		CF 227

Right Cylinder Head Front Face

Right Cylinder Head Front Face

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M10 x 1.5	211	212	N/A	213	214	215	27	1.063	22	0.866	FF 225
2	No Service - Manufacturing Use Only
3	No Service - Manufacturing Use Only
4	M23.6 Bore	No Service - Not Threaded						THRU		N/A		FF 222
5	M6 x 1.0	201	202	N/A	203	204	205	THRU		THRU		FF 223
6	M10 x 1.5	211	212	N/A	213	214	215	32	1.260	26	1.024	FF 224
7	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	FF 228
8	M8 x 1.25	610	N/A	619	208	209	620	THRU		22	0.866	FF 220
9	M8 x 1.25	610	N/A	619	208	209	620	THRU		22	0.866	FF 221
10	M14.68 Bore	No Service - Not Threaded						8.8	0.346	N/A		FF 227
11	M10 x 1.5	211	212	N/A	213	214	215	THRU		26	1.024	FF 226
12	M10 x 1.5	211	212	N/A	213	214	215	27	1.063	22	0.866	FF 229

Right Cylinder Head Intake Face

Right Cylinder Head Intake Face

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M6 x 1.0	201	202	N/R	203	204	205	22	0.866	18	0.709	IF 204
2	M6 x 1.0	201	202	N/R	203	204	205	22	0.866	18	0.709	IF 203
3	M6 x 1.0	201	202	N/R	203	204	205	22	0.866	18	0.709	IF 202
4	M6 x 1.0	201	202	N/R	203	204	205	22	0.866	18	0.709	IF 201

Right Cylinder Head Exhaust Face

Right Cylinder Head Exhaust Face

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M8 Bore	No Service - Not Threaded						8	0.315	N/A		EF 234
2	M8 Bore	No Service - Not Threaded						8	0.315	N/A		EF 233
3	M10 Bore	No Service - Not Threaded						10.7	0.421	N/A		EF 242
4	M16 x 1.5	No Service Tools Available						22	0.866	16	0.630	EF 201
5	M31.84 Bore	No Service - Not Threaded						THRU		N/A		EF 203
6	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 215
7	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 214
8	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 213
9	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 212
10	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 211
11	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 210
12	M10 Bore	No Service - Not Threaded						10.7	0.421	N/A		EF 243

Right Cylinder Head Exhaust Face with A.I.R.

Right Cylinder Head Exhaust Face with A.I.R.

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M8 Bore	No Service - Not Threaded						8	0.315	N/A		EF 234
2	M6 x 1.0	201	202	N/A	203	204	205	22	0.866	18	0.709	EF 229
3	M8 Bore	No Service - Not Threaded						51.4	2.024	N/A		EF 232
4	M6 x 1.0	201	202	N/A	203	204	205	22	0.866	18	0.709	EF 228
5	M6 x 1.0	201	202	N/A	203	204	205	22	0.866	18	0.709	EF 227
6	M8 Bore	No Service - Not Threaded						51.4	2.024	N/A		EF 231
7	M6 x 1.0	201	202	N/A	203	204	205	22	0.866	18	0.709	EF 226
8	M8 Bore	No Service - Not Threaded						8	0.315	N/A		EF 233
9	M8 Bore	No Service - Not Threaded						51.4	2.024	N/A		EF 230
10	M6 x 1.0	201	202	N/A	203	204	205	22	0.866	18	0.709	EF 225
11	M10 Bore	No Service - Not Threaded						10.7	0.421	N/A		EF 242
12	M16 x 1.5	No Service Tools Available						22	0.866	16	0.630	EF 201
13	M31.84 Bore	No Service - Not Threaded						THRU		N/A		EF 203
14	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 215
15	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 214
16	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 213
17	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 212
18	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 211
19	M8 x 1.25	206	207	N/A	208	209	210	27	1.063	22	0.866	EF 210
20	M10 Bore	No Service - Not Threaded						10.7	0.421	N/A		EF 243

Right Cylinder Head Rear Face

Right Cylinder Head Rear Face

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M8 x 1.25	206	207	N/A	208	29	210	27	1.063	22	0.866	RF 216
2	M16 x 1.5	No Service Tools Available						22	0.866	16	0.630	RF 220
3	No Service - Manufacturing Use Only
4	M16 x 1.5	No Service Tools Available						22	0.866	16	0.630	RF 221
5	M10 x 1.5	211	212	N/A	213	214	215	32	1.260	26	1.024	RF 218
6	3/8-18 NPSF	No Service Tools Available						THRU		N/A		RF 222
7	M31.84 Bore	No Service - Not Threaded						THRU		N/A		RF 219
8	No Service - Manufacturing Use Only
9	M8 x 1.25	206	207	N/A	208	29	210	27	1.063	22	0.866	RF 215
10	M8 x 1.25	206	207	N/A	208	29	210	27	1.063	22	0.866	RF 214

Engine Block Front

Engine Block Front

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M6 x 1.0	201	202	N/R	203	204	205	24	0.945	20	0.787	105
2	M8 x 1.25	206	207	N/R	208	209	210	27	1.063	22	0.866	123
3	M6 x 1.0	210	202	N/R	203	204	205	THRU		THRU		116
4	M8 x 1.25	206	207	N/R	208	209	210	25	0.984	20	0.787	121
5	M6 x 1.0	201	202	N/R	203	204	205	24	0.945	20	0.787	106
6	M8 x 1.25	206	207	N/R	208	209	210	THRU		THRU		138
7	M8 x 1.25	206	207	N/R	208	209	210	THRU		THRU		139
8	M6 x 1.0	201	202	N/R	203	204	205	24	0.945	20	0.787	107
9	M8 x 1.25	206	207	N/R	208	209	210	25	0.984	20	0.787	122
10	M6 x 1.0	201	202	N/R	203	204	205	THRU		THRU		117
11	M8 x 1.25	206	207	N/R	208	209	210	27	1.063	22	0.866	124
12	M6 x 1.0	201	202	N/R	203	204	205	25	0.984	21	0.827	141
13	M6 x 1.0	201	202	N/R	203	204	205	24	0.945	20	0.787	108
14	M6 x 1.0	201	202	N/R	203	204	205	24	0.945	20	0.787	109
15	M10 x 1.5	211	212	N/R	213	214	215	THRU		30	1.181	136
16	M6 x 1.0	201	202	N/R	203	204	205	24	0.945	20	0.787	110
17	5.96 M Bore	No Service - Not Threaded						9	0.354	N/A		102
18	M8 x 1.25	206	207	N/R	208	209	210	25	0.984	20	0.787	132
19	M8 x 1.25	206	207	N/R	208	209	210	THRU		24	0.945	126
20	M6 x 1.0	201	202	N/R	203	204	205	24	0.945	20	0.787	111
21	M10 x 1.5	211	212	N/R	213	214	215	36.5	1.437	30	1.181	137
22	M6 x 1.0	201	202	N/R	203	204	205	24	0.945	20	0.787	112
23	M8 x 1.25	610	N/R	619	208	209	620	29	1.142	24	0.945	128
24	M6 x 1.0	201	202	N/R	203	204	205	24	0.945	20	0.787	113
25	19.15 M Bore	No Service - Not Threaded						8	0.315	N/A		134
26	M6 x 1.0	201	202	N/R	203	204	205	24	0.945	20	0.787	114
27	M8 x 1.25	610	N/R	619	208	209	620	29	1.142	24	0.945	129
28	No Service - Not Threaded									N/A		133
29	M8 x 1.25	610	N/R	619	208	209	620	29	1.142	24	0.945	127
30	M6 x 1.0	201	202	N/R	203	204	205	24	0.945	20	0.787	115
31	5.96 M Bore	No Service - Not Threaded						9	0.354	N/A		101
32	M10 x 1.5	211	212	N/R	213	214	215	34.5	1.356	28.5	1.122	135
33	M8 x 1.25	206	207	N/R	208	209	210	27	1.063	22	0.866	130
34	M6 x 1.0	201	202	N/R	203	204	205	24	0.945	20	0.787	103
35	M8 x 1.25	206	207	N/R	208	209	210	27	1.063	22	0.866	131
36	M6 x 1.0	201	202	N/R	203	204	205	24	0.945	20	0.787	104
37	M6 x 1.0	201	202	N/R	203	204	205	25	0.984	21	0.827	140

Engine Block Left Side

Engine Block Left Side

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M10 x 1.5	211	212	N/R	213	214	215	37	1.457	29	1.142	606
2	M10 x 1.5	511	N/R	606	213	214	215	39.5	1.555	33.5	1.319	602
3	M10 x 1.5	511	N/R	606	213	214	215	39.5	1.555	33.5	1.319	603
4	M8 x 1.25	610	N/R	N/R	208	209	620	THRU		25	0.984	613
5	M6 x 1.0	201	202	N/R	203	204	205	25	0.984	21	0.827	608
6	M6 x 1.0	201	202	N/R	203	204	205	24	0.945	20	0.787	604
7	M10 x 1.5	511	N/R	606	213	214	215	39.5	1.555	33.5	1.319	611
8	M8 x 1.25	206	207	N/R	208	209	210	25	0.984	20	0.787	612
9	M10 x 1.5	511	N/R	606	213	214	215	39.5	1.555	33.5	1.319	610
10	M10 x 1.5	211	212	N/R	213	214	215	37	1.457	29	1.142	605

Engine Block Right Side

Engine Block Right Side

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M6 x 1.0	201	202	N/R	203	204	205	25	0.984	21	0.827	507
2	M8 x 1.25	610	N/R	611	208	209	620	THRU		25	0.984	506
3	M8 x 1.25	610	N/R	611	208	209	620	30	1.181	25	0.984	503
4	M12 x 1.75	No Service Tools Available						THRU		16	0.630	508
5	M10 x 1.5	211	212	N/R	213	214	215	33	1.299	27	1.063	505
6	M10 x 1.5	211	212	N/R	213	214	215	31	1.221	27	1.063	504
7	M10 x 1.5	No Service Tools Available						23	0.906	17	0.669	914

Engine Block Rear

Engine Block Rear

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M13 Bore	No Service - Not Threaded								N/A		206
2	M10 x 1.5	211	212	N/R	213	214	215	32	1.260	26	1.024	203
3	M10 x 1.5	211	212	N/R	213	214	215	32	1.260	26	1.024	204
4	M10 x 1.5	211	212	N/R	213	214	215	37.6	1.480	34.6	1.362	201
5	M13 Bore	No Service - Not Threaded						THRU		THRU		205
6	M20 x 1.5	No Service Tools Available						26	1.024	14	0.551	234
7	M10 x 1.5	211	212	N/R	213	214	215	THRU		THRU		202

Engine Block Top

Engine Block Top

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M6 x 1.0	201	202	N/R	203	204	205	21	0.827	17	0.669	313
2	M6 x 1.0	201	202	N/R	203	204	205	21	0.827	17	0.669	303
3	M6 x 1.0	201	202	N/R	203	204	205	21	0.827	17	0.669	304
4	M6 x 1.0	201	202	N/R	203	204	205	21	0.827	17	0.669	305
5	M6 x 1.0	201	202	N/R	203	204	205	21	0.827	17	0.669	306
6	M6 x 1.0	201	202	N/R	203	204	205	21	0.827	17	0.669	307
7	M6 x 1.0	201	202	N/R	203	204	205	21	0.827	17	0.669	308
8	M6 x 1.0	201	202	N/R	203	204	205	21	0.827	17	0.669	312
9	M6 x 1.0	201	202	N/R	203	204	205	21	0.827	17	0.669	311
10	M6 x 1.0	201	202	N/R	203	204	205	21	0.827	17	0.669	310
11	M6 x 1.0	201	202	N/R	203	204	205	21	0.827	17	0.669	309
12	M6 x 1.0	201	202	N/R	203	204	205	21	0.827	17	0.669	314

Engine Block Left Deck Face

Engine Block Left Deck Face

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M6 x 1.0	608	N/R	N/R	203	204	205	30	1.181	25	0.984	811
2	M6 x 1.0	608	N/R	N/R	203	204	205	30	1.181	25	0.984	810
3	M11 x 1.5	601	N/R	605	602	603	507	83	3.268	77	3.032	801
4	M11 x 1.5	601	N/R	605	602	603	507	83	3.268	77	3.032	803
5	M11 x 1.5	601	N/R	605	602	603	507	83	3.268	77	3.032	804
6	M11 x 1.5	601	N/R	605	602	603	507	83	3.268	77	3.032	802
7	M11 x 1.5	601	N/R	N/R	602	603	507	102	4.016	96	3.780	808
8	M11 x 1.5	601	N/R	N/R	602	603	507	102	4.016	96	3.780	807
9	M11 x 1.5	601	N/R	N/R	602	603	507	102	4.016	96	3.780	806
10	M11 x 1.5	601	N/R	N/R	602	603	507	102	4.016	96	3.780	805
11	M6 x 1.0	608	N/R	N/R	203	204	205	30	1.181	25	0.984	809

Engine Block Right Deck Face

Engine Block Right Deck Face

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M11 x 1.5	601	N/R	605	602	603	507	83	3.268	77	3.032	702
2	M11 x 1.5	601	N/R	605	602	603	507	83	3.268	77	3.032	704
3	M11 x 1.5	601	N/R	605	602	603	507	83	3.268	77	3.032	703
4	M11 x 1.5	601	N/R	605	602	603	507	83	3.268	77	3.032	701
5	M6 x 1.0	608	N/R	N/R	203	204	205	30	1.181	25	0.984	712
6	M6 x 1.0	608	N/R	N/R	203	204	205	30	1.181	25	0.984	709
7	M6 x 1.0	608	N/R	N/R	203	204	205	30	1.181	25	0.984	710
8	M11 x 1.5	601	N/R	N/R	602	603	507	102	4.016	96	3.780	705
9	M11 x 1.5	601	N/R	N/R	602	603	507	102	4.016	96	3.780	706
10	M11 x 1.5	601	N/R	N/R	602	603	507	102	4.016	96	3.780	707
11	M11 x 1.5	601	N/R	N/R	602	603	507	102	4.016	96	3.780	708

Engine Block Lower Face

Engine Block Lower Face

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M8 x 1.25	610	N/R	619	208	209	620	29	1.142	24	0.945	1413
2	M10 x 1.5	511	N/R	N/R	512	513	514	37	1.457	33	1.299	1431
3	M10 x 1.5	511	N/R	N/R	512	513	514	37	1.457	33	1.299	1423
4	M8 x 1.25	610	N/R	N/R	208	209	620	THRU		THRU		1414
5	M8 x 1.25	610	N/R	N/R	208	209	620	37	1.457	32	1.260	1415
6	M10 x 1.5	511	N/R	N/R	512	513	514	37	1.457	33	1.299	1432
7	M10 x 1.5	511	N/R	N/R	512	513	514	37	1.457	33	1.299	1424
8	M8 x 1.25	610	N/R	N/R	208	209	620	THRU		THRU		1416
9	M10 x 1.5	511	N/R	607	213	214	215	46	1.811	39.5	1.555	1435
10	M10 x 1.5	511	N/R	607	213	214	215	46	1.811	39.5	1.555	1436
11	M10 x 1.5	511	N/R	N/R	512	513	514	37	1.457	33	1.299	1433
12	M10 x 1.5	511	N/R	N/R	512	513	514	37	1.457	33	1.299	1425
13	M10 x 1.5	511	N/R	N/R	512	513	514	37	1.457	33	1.299	1421
14	M10 x 1.5	511	N/R	N/R	512	513	514	37	1.457	33	1.299	1429
15	M8 x 1.25	610	N/R	N/R	208	209	620	37	1.457	32	1.260	1412
16	M8 x 1.25	610	N/R	619	208	209	620	29	1.142	24	0.945	1411
17	M10 x 1.5	511	N/R	N/R	512	513	514	37	1.457	33	1.299	1428
18	M10 x 1.5	511	N/R	N/R	512	513	514	37	1.457	33	1.299	1420
19	M8 x 1.25	610	N/R	N/R	208	209	620	THRU		THRU		1410
20	M10 x 1.5	511	N/R	N/R	512	513	514	37	1.457	33	1.299	1427
21	M10 x 1.5	511	N/R	N/R	512	513	514	37	1.457	33	1.299	1419
22	M8 x 1.25	610	N/R	N/R	208	209	620	THRU		THRU		1409
23	M8 x 1.25	610	N/R	N/R	208	209	620	37	1.457	32	1.260	1408
24	M10 x 1.5	511	N/R	N/R	512	513	514	37	1.457	33	1.299	1426
25	M10 x 1.5	511	N/R	N/R	512	513	514	37	1.457	33	1.299	1418
26	M10 x 1.5	511	N/R	N/R	512	513	514	37	1.457	33	1.299	1422
27	M10 x 1.5	511	N/R	N/R	512	513	514	37	1.457	33	1.299	1430

Lower Crankcase Pan Face

Lower Crankcase Pan Face

Hole Location	Thread Size	Drill	Counter Bore Tool	Stop Collar	Tap	Driver	Insert	Drill Depth (Maximum)		Tap Depth (Minimum)		Engineering Number
		J 42385-						MM	(IN)	MM	(IN)
1	M8 x 1.25	206	207	N/R	208	209	210	21.5	0.847	18.5	0.728	451
2	M8 x 1.25	206	207	N/R	208	209	210	25	0.984	20	0.787	452
3	M8 x 1.25	206	207	N/R	208	209	210	25	0.984	20	0.787	453
4	M8 x 1.25	206	207	N/R	208	209	210	25	0.984	20	0.787	454
5	M8 x 1.25	206	207	N/R	208	209	210	25	0.984	20	0.787	455
6	M8 x 1.25	206	207	N/R	208	209	210	25	0.984	20	0.787	456
7	M8 x 1.25	206	207	N/R	208	209	210	25	0.984	20	0.787	457
8	M8 x 1.25	206	207	N/R	208	209	210	25	0.984	20	0.787	458
9	M8 x 1.25	206	207	N/R	208	209	210	25	0.984	20	0.787	459
10	M8 x 1.25	206	207	N/R	208	209	210	25	0.984	20	0.787	443
11	M8 x 1.25	206	207	N/R	208	209	210	25	0.984	20	0.787	444
12	M8 x 1.25	206	207	N/R	208	209	210	25	0.984	20	0.787	445
13	M8 x 1.25	206	207	N/R	208	209	210	25	0.984	20	0.787	446
14	M8 x 1.25	206	207	N/R	208	209	210	25	0.984	20	0.787	447
15	M8 x 1.25	206	207	N/R	208	209	210	25	0.984	20	0.787	448
16	M8 x 1.25	206	207	N/R	208	209	210	21.5	0.847	18.5	0.728	449
17	M8 x 1.25	206	207	N/R	208	209	210	21.5	0.847	18.5	0.728	450