- Ensure the RFI/ground spring (1) and the seal (2) are in place and inspect each for serviceability.
- Install the right spark plug boots onto the ignition coil assembly.
- Install the right spark plugs.
- Position the ignition coil assembly on the right camshaft cover.
- Install the ignition coil assembly bolts in sequence.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the spark plugs to 15 N·m (11 lb ft).
Important: DO NOT damage the ignition coil perimeter seal.
Tighten
Tighten the ignition coil assembly bolts to 9 N·m (80 lb in).
