- Remove the indicated control valve body bolts (374-381, 384).
- Carefully lift the fluid pressure manual valve position switch assembly
(395) off of the control valve body (300). Handle the switch assembly carefully,
it is very delicate.
- Remove the control valve body assembly (300).
- Remove the two retainers (368) from the valve body assembly.
- Remove the spacer plate assembly (370) with the two screen/seal
assemblies (382) and the gaskets (369, 371) from the valve body (300).
• | Remove the six ball check valves (372, 373) from the valve body
(300). |
• | Remove the case cover pin (410). |
- Remove the four ball check valves (372) from the case cover (400).