Tools Required

J 44212 Camshaft Holding Tool

1. Remove the J 44212 from the right cylinder head camshafts.



2. Ensure new camshaft cover seals are installed.
3. Place the right camshaft cover in position on the cylinder head by aligning the bolt holes.
4. Install the NEW camshaft cover bolt grommets prior to installing the camshaft cover bolts.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

5. Install the camshaft cover bolts.

Tighten
Tighten the camshaft cover bolts to 10 N·m (89 lb in).