Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the right front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Support the engine assembly with a suitable jack.
- Remove the nut securing the right engine mount to the right engine mount bracket.
- Lower the jack allowing the engine to lower slightly.
- Remove the nut (2) securing the power steering hose to the right engine mount bracket (1).
- Remove the four bolts securing the right engine mount bracket (1) to the engine.
- Remove the right engine mount bracket (1).
Installation Procedure
- Position the right engine mount bracket (1) to the engine.
- Install the four bolts securing the right engine mount bracket (1) to the engine.
- Install the nut (2) securing the power steering pressure hose to the right engine mount bracket (1).
- Raise the engine into position.
- Install the nut securing the right engine mount to the right engine mount bracket.
- Remove the engine support jack.
- Install the right front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Lower the vehicle.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the right engine mount bracket bolts to 50 N·m (37 lb ft).
Tighten
Tighten the power steering pressure hose retaining nut to
9 N·m (80 lb in).
Tighten
Tighten the right engine mount nut to 80 N·m (59 lb ft).
