Application | Specification | |
---|---|---|
Metric | English | |
Accelerator Controls Cable Bracket Bolts | 12 N·m | 106 lb in |
Air Cleaner Element / PCM Housing Cover Screws | 4 N·m | 35 lb in |
Camshaft Position Sensor | 10 N·m | 89 lb in |
Crankshaft Position (CKP) Sensors | 10 N·m | 89 lb in |
EGR Crossover Pipe Bolt | 24 N·m | 18 lb ft |
EGR Pipe Nut | 60 N·m | 44 lb in |
Engine Coolant Temperature (ECT) Sensor | 20 N·m | 15 lb ft |
Exhaust Gas Recirculation (EGR) Valve Bolt | 24 N·m | 18 lb ft |
EVAP Canister | 6 N·m | 53 lb in |
EVAP Canister Purge Valve Bolt | 12 N·m | 106 lb in |
EVAP Vent Valve Bolt | 6 N·m | 53 lb in |
Fuel Filler Pipe Attaching Ground Bolt | 9 N·m | 80 lb in |
Fuel Filler Pipe Hose Clamps | 3.5N·m | 31 lb in |
Fuel Injector Sight Shield Nuts | 2.3 N·m | 20 lb in |
Fuel Rail Assembly Studs | 10 N·m | 89 lb in |
Fuel Rail End-Point Bracket Bolt | 10 N·m | 89 lb in |
Fuel Sender Access Panel | 2 N·m | 18 lb in |
Fuel Sender Access Panel Bolts | 2 N·m | 18 lb in |
Fuel Tank Filler Pipe Ground Wire Bolt | 9 N·m | 80 lb in |
Fuel Tank Retaining Strap Bolts | 42 N·m | 31 lb ft |
Heated Oxygen Sensor (HO2S) | 41 N·m | 30 lb ft |
Idle Air Control Valve Attaching Bolts | 3 N·m | 27 lb in |
Ignition Coil Cassette | 9 N·m | 80 lb in |
Ignition Control Module Screws | 0.8 N·m | 7 lb in |
In-Line Fuel Filter Outlet Nut | 30 N·m | 22 lb ft |
Intake Air Duct Clamps | 3 N·m | 27 lb in |
Knock Sensor (KS) | 25 N·m | 18 lb ft |
MAF/IAT Sensor Clamps | 3 N·m | 27 lb in |
MAP Sensor Retaining Bracket | 12 N·m | 106 lb in |
PCM Connector Screws | 8 N·m | 71 lb in |
Rear Frame Bolts | 100 N·m | 74 lb ft |
Secondary Air Injection (AIR) System (if equipped) Bolts/Nuts (pumps, Shutoff valves, etc.) | 9 N·m | 80 lb in |
Spark Plugs | 17-23 N·m | 13-16 lb ft |
Throttle Body Attaching Bolts | 12 N·m | 106 lb in |
Throttle Position (TP) Sensor Attaching Screws | 3 N·m | 27 lb in |