Removal Procedure
- Remove the IP compartment handle. Refer to
Instrument Panel Compartment Door Latch Release Handle Replacement
.
- Insert the key into the
IP compartment door lock cylinder.
- Insert a small diameter tool into the slot on the upper side of
the door handle cylinder housing and depress and hold the lock cylinder retainer.
- While the lock cylinder retainer is still depressed, turn the
key 1/4 turn counterclockwise.
- Pull to remove the lock cylinder.
Installation Procedure
- If installing a new lock cylinder. Refer to
Key and Lock Cylinder Coding
in General Information.
- Insert the key into the
lock cylinder.
- Align the lock cylinder in the same position used for removal.
Push the cylinder in place to seat fully.
- Turn the key 1/4 turn clockwise to secure the lock cylinder
retainer.
- Remove the key from the lock cylinder.
- Inspect the operation of the lock cylinder.
The lock cylinder should only allow a 1/4 turn and should be
securely retained in the door handle.
- Install the IP compartment handle. Refer to
Instrument Panel Compartment Door Latch Release Handle Replacement
.