GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 629607  Size: SH
  1. Remove the fasteners (1) from the trim plate.

  2. Object Number: 629608  Size: SH
  3. Pull the console rear trim plate (1) rearward in order to disengage the trim plate from the console.

Installation Procedure


    Object Number: 629608  Size: SH
  1. Align the console trim plate (1) and snap into place.

  2. Object Number: 629607  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the console rear trim plate fasteners (1).
  4. Tighten
    Tighten the fasteners (1) to 1.4 N·m (12 lb in).