Front Bumper Impact Bar Replacement for Oldsmobile Aurora 2003

1. Open the hood.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
3. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .



4. Remove the bolts (3, 4) retaining the front bumper impact bar.
5. Remove the front bumper impact bar.

1. Position the front bumper impact bar to the front bumper brackets.
2. Loose assemble bolt (4) through the bracket.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the bolts to secure the front bumper impact bar to the bracket.

Tighten
Tighten the bolts (3) first, then (4) to 25 N·m (18 lb ft).

4. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .
5. Lower the vehicle.
6. Close the hood.