Removal Procedure
- Remove the door trim panel.
Refer to
Front Side Door Trim Panel Replacement
.
- Remove the door module. Refer to
Door Control Module Replacement
.
- Remove the nylon nuts (2).
- Push the wiring harness
through the hole in the water deflector.
- Remove the retainers at the upper corners of the water deflector.
- Gently peel the water deflector away from the door, being careful
not to damage the sealer.
- Remove the water deflector.
Installation Procedure
- Clean the
water deflector to the inner door panel mating surface with denatured alcohol
or the equivalent.
- Route the wiring harness through the hole in the water deflector.
- Align the water deflector to the door assembly.
- Install the retainers at the upper corners of the water deflector.
- Seat the water deflector to the door using a rolling tool.
- Install the nylon nuts (2).
- Install the door module. Refer to
Door Control Module Replacement
.
- Install the door trim panel. Refer to
Front Side Door Trim Panel Replacement
.