Rear Bumper Filler Panel Replacement Standard

1. Remove the license plate lamp harness. Refer to Rear License Lamp Replacement in Lighting Systems.



2. Remove the bolts which retain the rear bumper filler panel to the vehicle.
3. Remove the rear bumper filler panel from the vehicle.

1. Install the bumper filler panel to the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the bolts which retain the rear bumper filler panel to the vehicle.

Tighten
Tighten the rear bumper filler panel bolts to 1.5 N·m (14 lb in).

3. Install the license plate lamp harness. Refer to Rear License Lamp Replacement in Lighting Systems.

Rear Bumper Filler Panel Replacement Utility Vehicles with Liftgate

1. Remove the license plate lamp harness. Refer to Rear License Lamp Replacement in Lighting Systems.



2. Remove the bumper filler panel by pulling the retaining clips out of the body.
3. Remove the bumper filler panel from the vehicle.

1. Install the bumper filler panel to the vehicle by pressing the retaining clips onto the vehicle body holes.
2. Install the license plate lamp harness. Refer to Rear License Lamp Replacement in Lighting Systems.