GM Service Manual Online
For 1990-2009 cars only

Body Side Trim Panel Replacement Standard Cab Pickup

Removal Procedure


    Object Number: 392847  Size: SH
  1. Remove the door sill trim plate. Refer to Door Sill Plate Replacement .
  2. Remove the coat hook. Refer to Coat Hook Replacement .
  3. Remove the upper and the lower seat belt anchor bolts.
  4. Disconnect the electrical connectors, as needed.
  5. Remove the shoulder belt opening trim cover.
  6. Feed the seat belt through the trim cover.
  7. Remove the body side trim panel from the vehicle.

Installation Procedure


    Object Number: 392847  Size: SH
  1. Feed the seat belt through the trim panel.
  2. Install the shoulder belt opening trim cover.
  3. Connect the electrical connectors, as needed.
  4. Install the body side trim panel to the vehicle.
  5. Install the upper and lower seat belt anchor bolts.
  6. Install the coat hook. Refer to Coat Hook Replacement .
  7. Install the door sill trim plate. Refer to Door Sill Plate Replacement .

Body Side Trim Panel Replacement Extended Cab Pickup

Removal Procedure


    Object Number: 392829  Size: SH
  1. Remove the upper and the lower seat belt anchor bolts.
  2. Remove the coat hook. Refer to Coat Hook Replacement .
  3. Remove the door sill trim plate. Refer to Door Sill Plate Replacement .

  4. Object Number: 303385  Size: SH
  5. Remove the screws that retain the body side trim panel to the vehicle .
  6. Disconnect the electrical connectors, as needed.
  7. Remove the shoulder belt opening trim cover.
  8. Feed the seat belt through the trim cover.
  9. Remove the body side trim panel from the vehicle.

Installation Procedure


    Object Number: 303385  Size: SH
  1. Feed the seat belt through the trim panel.
  2. Install the shoulder belt opening trim cover.
  3. Connect the electrical connectors, as needed.
  4. Install the body side trim panel to the vehicle.
  5. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  6. Install the screws that retain the body side trim panel to the vehicle.
  7. Tighten
    Tighten the screws to 1.9 N·m (17 lb in).


    Object Number: 392829  Size: SH
  8. Install the upper and lower seat belt anchor bolts.
  9. Tighten

        • Tighten the upper bolts to to 70 N·m (52 lb ft).
        • Tighten the lower bolts to to 80 N·m (59 lb ft).
  10. Install the coat hook. Refer to Coat Hook Replacement .
  11. Install the door sill trim plate. Refer to Door Sill Plate Replacement .

Body Side Trim Panel Replacement 2-Door Utility

Removal Procedure


    Object Number: 303390  Size: SH
  1. Remove the upper and lower front seat anchor bolts.
  2. Remove the rear seat belt lower anchor nut.
  3. Remove the assist handle. Refer to Assist Handle Replacement .
  4. Remove the coat hook. Refer to Coat Hook Replacement .
  5. Remove the endgate or the liftgate opening door sill trim plate. Refer to Rear Floor Rear Trim Plate Replacement or Liftgate Door Sill Plate Replacement .
  6. Fold the rear seats down.
  7. Remove the jack storage cover (left side only).
  8. Remove the screw that retains the upper body side trim body side trim panel to the vehicle (left side only).
  9. Remove the upper body side trim panel from the vehicle.
  10. Feed the seat belt through the trim panel.

  11. Object Number: 303387  Size: SH
  12. Remove the body side front lower trim panel from the vehicle.

Installation Procedure


    Object Number: 303387  Size: SH
  1. Install the body side front lower trim panel to the vehicle.

  2. Object Number: 303390  Size: SH
  3. Install the upper body side trim panel to the vehicle.
  4. Feed the seat belt through the trim panel.
  5. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  6. Install the screw that retains the upper body side trim panel to the vehicle.
  7. Tighten
    Tighten the screw to 1.9 N·m (17 lb ft).

  8. Install the jack storage cover (left side only).
  9. Install the endgate or the liftgate opening door sill trim plate. Refer to Rear Floor Rear Trim Plate Replacement or Liftgate Door Sill Plate Replacement .
  10. Install the coat hook. Refer to Coat Hook Replacement .
  11. Install the assist handle. Refer to Assist Handle Replacement .
  12. Install the rear seat belt anchor nut.
  13. Tighten
    Tighten the nut to 80 N·m (59 lb ft).

  14. Install the upper and lower front seat belt anchor bolts.
  15. Tighten
    Tighten the bolts to 70 N·m (52 lb ft).

Body Side Trim Panel Replacement 4-Door Utility

Removal Procedure


    Object Number: 303398  Size: SH
  1. Remove the upper and lower rear seat belt anchor bolts.
  2. Remove the endgate or the liftgate opening door sill trim plate. Refer to Rear Floor Rear Trim Plate Replacement or Liftgate Door Sill Plate Replacement .
  3. Remove the jack storage cover (driver side only).
  4. Remove the screws that retain the body side trim panel to the vehicle (driver side only).
  5. Remove the spare tire and the carrier assembly (if equipped).
  6. Remove the left and right body side trim panel from the vehicle.
  7. Feed the seat belt through the trim panel.

Installation Procedure


    Object Number: 303398  Size: SH
  1. Install the body side trim panel to the vehicle.
  2. Feed the seat belt through the trim panel.
  3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the screws that retain the body side trim panel to the vehicle (left side only).
  5. Tighten
    Tighten the screws to 1.9 N·m (17 lb ft).

  6. Install the spare tire and the carrier assembly (if equipped).
  7. Install the jack storage cover (left side only).
  8. Install the endgate or liftgate opening door sill trim plate. Refer to Rear Floor Rear Trim Plate Replacement or Liftgate Door Sill Plate Replacement .
  9. Install the upper and lower rear seat belt anchor bolts.
  10. Tighten

        • Tighten the upper bolts to to 70 N·m (52 lb ft).
        • Tighten the lower bolts to to 80 N·m (59 lb ft).