Rear Bumper Fascia Replacement for Oldsmobile Bravada 2003

1. Remove the backup lamp socket assemblies from the backup lamp housings, if applicable. Refer to Backup Lamp Replacement .



2. Remove the lower fascia push-pins.



3. Remove the screws from the rear wheelhouse flanges.



4. Remove the upper retaining bolts from the back of the fascia.
5. Remove the fascia from the vehicle.

1. Position the fascia to the vehicle impact bar.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the upper retaining bolts to the fascia.

Tighten
Tighten the bolts to 2.5 N·m (22 lb in).




3. Install the screws that retain the fascia to the wheelhouse flanges.

Tighten
Tighten the screws to 4.5 N·m (40 lb in).




4. Install and fully seat the lower push-pins.
5. Install the backup lamp socket assemblies, if applicable. Refer to Backup Lamp Replacement .