For 1990-2009 cars only
Tools Required
| • | J 6125-B Slide Hammer |
| • | J 45104 Axle Remover Adapter |
Removal Procedure
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Drain the lubricant from the differential carrier assembly. Refer to Lubricant Change .
- Remove the intermediate shaft bearing assembly. Refer to Front Drive Axle Intermediate Shaft Bearing Assembly Replacement .
- Install the J 45104 to the J 6125-B .
- Install the J 45104 and the J 6125-B into the threaded hole on the inner axle shaft.
- Remove the inner axle shaft using the J 6125-B (1) and the J 45104 (2).
Important: Do not nick or cut the inboard (oil pan) side differential carrier assembly oil seal.
Support the inner axle shaft as necessary to in order to pull the inner axle shaft from the differential carrier assembly and evenly through the oil pan.
Installation Procedure
- Install the J 45104 and the J 6125-B to the inner axle shaft.
- While supporting the J 6125-B and the J 45104 with the inner axle shaft, place the inner axle shaft into the inner axle shaft opening in the oil pan.
- Using the J 6125-B (1) and the J 45104 (2), carefully guide the inner axle shaft through the oil pan and differential carrier assembly oil seal into the differential side gear turning as necessary in order to align the inner axle shaft splines with the differential side gear splines.
- Using the J 6125-B , push the inner axle shaft into the differential side gear until the retaining ring snaps the inner axle shaft into place.
- Remove the J 45104 and the J 6125-B .
- Install the intermediate shaft bearing assembly. Refer to Front Drive Axle Intermediate Shaft Bearing Assembly Replacement .
- Add lubricant to the differential carrier assembly. Use the proper fluid. Refer to Lubricant Change .
- Lower the vehicle.
Important: Do not nick or cut the differential carrier assembly oil seal.
Pull on the inner axle shaft to ensure that it is locked into position.
