GM Service Manual Online
For 1990-2009 cars only

Step

Action

Yes

No

1

Did you review the Steering Wheel and Column - Tilt Description and Operation and perform the necessary inspections?

Go to Step 2

Go to Symptoms - Steering Wheel and Column

2

Verify that the steering column is loose.

Is the steering column loose?

Go to Step 3

System OK

3

Inspect the steering column mounting brackets for looseness.

Are the steering column mounting brackets loose?

Go to Step 8

Go to Step 4

4

Verify that the steering column bracket capsule is not sheared.

Is the steering column bracket capsule sheared?

Go to Step 9

Go to Step 5

5

Inspect the support screws for looseness.

Are the support screws loose?

Go to Step 10

Go to Step 6

6

Inspect the intermediate shaft for worn joints or looseness.

Is the intermediate joint worn or loose?

Go to Step 11

Go to Step 7

7

Inspect the tilt head, support and pivot pins for looseness.

Are there any loose components?

Go to Step 12

Go to Step 2

8

Tighten the brackets to specifications. Refer to Fastener Tightening Specifications .

Did you complete the repair?

Go to Step 13

--

9

Replace the jacket assembly. Refer to Steering Column Jacket Replacement .

Did you complete the replacement?

Go to Step 13

--

10

Tighten the support screws to specifications. Refer to Fastener Tightening Specifications .

Did you complete the repair?

Go to Step 13

--

11

Tighten or replace the intermediate shaft as needed. Refer to Upper Intermediate Steering Shaft Replacement and Lower Intermediate Steering Shaft Replacement .

Did you complete the repair?

Go to Step 13

--

12

Repair or replace the tilt head, support and pivot pins as necessary. Refer to Steering Column Tilt Head Replacement .

Did you complete the replacement?

Go to Step 13

--

13

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3