GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2002 🢒 Bravada - 2WD 🢒 Body and Accessories 🢒 Frame and Underbody 🢒 Assist Step Support Bracket Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 743500 Size: SH
  2. Remove the bolts that retain the assist step support brackets to the body.
  3. Remove the assist step assembly from the vehicle.
  4. Place the step assembly on a clean, prepared surface.

    5. Object Number: 750777 Size: SH
  5. Remove the nuts (1) that retain the assist step to the support brackets.
  6. Remove the support brackets from the assist step.

Installation Procedure

    Object Number: 750777 Size: SH
  1. Position the assist step to the support brackets.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the nuts (1) that retain the assist step to the support brackets.

    3. Tighten
    Tighten the nuts to 25 N·m (18 lb ft).


    Object Number: 743500 Size: SH
  3. Position the assist step assembly to the vehicle.
  4. Install the bolts that retain the support brackets to the body.

    5. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  5. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .