| Table 1: | Body Control Module (BCM) |
| Table 2: | Driver Door Module (DDM)/Passenger Door Module (PDM) |
| Table 3: | Instrument Panel Cluster (IPC) |
| Table 4: | Powertrain Control Module (PCM) |
The scan tool data lists contain all the instrument panel, gauges, and console related parameters that are available on the scan tool. The parameters in the list are arranged in alphabetical order. The data list column indicates the location of the parameter within the scan tool menu selections.
Use the scan tool data lists as directed by a diagnostic table or in order to supplement the diagnostic procedures. Begin all of the diagnostic procedures with Diagnostic System Check - Instrument Cluster , or Diagnostic System Check - Audible Warnings .
Use the scan tool data lists only after the following is determined:
| • | There is no published DTC procedure nor published symptom procedure for the customer concern. |
| • | The DTC or symptom procedure indicated by the diagnostic system check does not resolve the customer concern. |
The typical data values are obtained from a properly operating vehicle under the conditions specified in the first row of the scan tool data list table. Comparison of the parameter values from the suspect vehicle with the typical data values may reveal the source of the customer concern.
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF/Headlamps Off/Doors Closed/Park Brake Unapplied | |||
Headlamp Switch | Inputs | Active/Inactive | Inactive |
Hood Ajar Switch | Inputs | Active/Inactive | Inactive |
Ignition 0 | Inputs | On/Off | On |
Ignition 1 | Inputs | On/Off | On |
Ignition 3 | Inputs | On/Off | On |
Key In Ignition | Inputs | Yes/No | Yes |
Left Rear Door Ajar Sw | Inputs | On/Off | Off |
Park Brake Switch | Inputs | Set/Released | Released |
Parklamp Switch | Inputs | Active/Inactive | Inactive |
Right Rear Door Ajar Sw | Inputs | On/Off | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition ON/Engine OFF/Vehicle in PARK/All doors closed | |||
Battery 1 Low Current | Data | Voltage | 12.8 V |
Battery 2 High Current | Data | Voltage | 12.8 V |
Door Ajar Switch | Inputs | On/Off | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF/Seat Belt Buckled/High Beams Off/Park Brake Unapplied | |||
ABS Lamp | Inputs/Outputs | On/Off | Off |
Air Bag Lamp | Inputs/Outputs | On/Off | Off |
Battery | Inputs/Outputs | On/Off | On |
Battery Voltage | Data 1 | Voltage | 12.2 V (varies) |
Brake Lamp | Inputs/Outputs | On/Off | Off |
Check Gages Lamp | Inputs/Outputs | On/Off | Off |
Cruise Control | Inputs/Outputs | On/Off | Off |
DIC Fuel Info | Inputs/Outputs | On/Off | Off |
DIC Personalization | Inputs/Outputs | On/Off | Off |
DIC Select | Inputs/Outputs | On/Off | Off |
DIC Trip Info | Inputs/Outputs | On/Off | Off |
Displayed Coolant Temperature | Data 1 | Celsius (Fahrenheit) | Varies |
Displayed Fuel Level | Data 1 | % | Varies |
Displayed Odometer | Data 2 | km (miles) | Varies |
Displayed Oil Pressure | Data 1 | kPA (PSI) | 0 kPA (0 PSI) |
Engine Speed | Data 1 | RPM | 0 RPM |
Fasten Seat Belts | Inputs/Outputs | On/Off | Off |
High Beam Lamp | Inputs/Outputs | On/Off | Off |
Ignition 1 Voltage | Data 1 | Voltage | 12.2 V (varies) |
Ignition Since Current DTC | Data 1 | cycles | Varies |
Left Turn Input | Inputs/Outputs | Open/Closed | Open |
Low Fuel Lamp | Inputs/Outputs | On/Off | Off |
Low Washer Fluid | Inputs/Outputs | OK/Low | OK |
Monitored Coolant Temperature | Data 1 | Celsius (Fahrenheit) | Varies |
Monitored Fuel Level | Data 1 | % | Varies |
Monitored Oil Pressure | Data 1 | kPA (PSI) | 0 kPA (0 PSI) |
PRND321 State | Inputs/Outputs | Park, Reverse, Neutral, Drive, 3rd, 2nd, 1st | Park |
Rear Gate/Door | Inputs/Outputs | Open/Closed | Closed |
Right Turn Input | Inputs/Outputs | Open/Closed | Open |
Security Lamp | Inputs/Outputs | On/Off | Off |
Service 4WD | Inputs/Outputs | On/Off | Off |
Trip Odometer A | Data 2 | kilometers (miles) | Varies |
Trip Odometer B | Data 2 | kilometers (miles) | Varies |
Trip Reset Switch | Inputs/Outputs | Active/Inactive | Inactive |
Vehicle Speed | Data 1 | kilometers per hour (miles per hour) | 0 mph (0 km/h) |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Engine Idling/Normal Operating Temperature | |||
ECT Sensor | Engine Data 1 Engine Data 2 Engine Data 3 EVAP Data Fuel Trim Data Misfire Data | Celsius (Fahrenheit) | 85-105°C (185-220°F) |
Engine Oil Level Switch | Engine Data 3 | OK/Low | OK |
Engine Oil Life Remaining | Engine Data 3 | Percent | 0-100% (varies) |
Engine Oil Pressure Switch | Engine Data 3 | OK/Low | OK |
Engine Speed | Engine Data 1 Engine Data 2 Engine Data 3 EVAP Data Fuel Trim Data Misfire Data | RPM | ±100 RPM from desired idle speed |
Fuel Level Sensor | Engine Data 1 EVAP Data | Percent | 0-100% (varies) |
Ignition 1 Signal | Engine Data 1 Engine Data 2 Engine Data 3 Fuel Trim Data | Voltage | 12.2 V (varies) |
Vehicle Speed Sensor | Engine Data 1 Engine Data 2 Engine Data 3 EVAP Data Fuel Trim Data Misfire Data | km/h (mph) | 0 km/h (0 mph) |
