Removal Procedure
- Remove the instrument panel (IP) acessory trim plate. Refer to
Instrument Panel Accessory Trim Plate Replacement
in Instrument Panel, Gages and Console.
- Disconnect the electrical connector from the wiper washer switch.
- Release the wiper washer switch locking tabs.
- Remove the switch from the trim plate.
Installation Procedure
- Position the switch to the trim plate.
- Connect the electrical connector to the wiper washer switch.
- Install the switch to the instrument panel trim plate, ensuring that the locking tabs are properly seated.
- Install the instrument panel (IP) acessory trim plate. Refer to
Instrument Panel Accessory Trim Plate Replacement
in Instrument Panel, Gages and Console.