Ignition Key Will Not Remove From Ignition Lock Cylinder (Reposition Shifter Boot)
| Subject: | Ignition Key Will Not Remove From Ignition Lock Cylinder (Reposition Shifter Boot) |
| Models: | 2004-2007 Buick Rainier |
| 2002-2008 Chevrolet TrailBlazer Models |
| 2002-2008 GMC Envoy Models |
| 2003-2004 Oldsmobile Bravada |
This bulletin is being revised to include the 2008 model year. Please discard Corporate Bulletin Number 05-07-30-021A (Section 07 - Transmission/Transaxle).
Condition
Some customers may comment that they are unable to remove the ignition key from the ignition cylinder.
Cause
The shifter boot may be caught/trapped in the shifter assembly mechanism.
Correction
DO THIS | DON'T DO THIS |
|---|---|
Reposition the shifter boot. | DO NOT replace the complete shifter assembly. ONLY replace the shifter boot if damaged. |
- Inspect the shifter boot for being caught/trapped in the shifter assembly.
- Reposition the shifter boot so that it is not caught/trapped in the shifter assembly.
| • | If the shifter boot is NOT caught/trapped in the shift assembly, refer to Ignition Key Cannot Be Removed from the Ignition Lock Cylinder in SI. |
| • | If the shifter boot IS caught/trapped in the shifter assembly, continue with the next step. |
Important:
• DO NOT replace the complete shifter assembly for this condition. • ONLY replace the shifter boot/handle if damaged by shifter assembly.
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation | Description | Labor Time |
|---|---|---|
K5111 | Boot/Handle, Automatic Transmission Control Lever - Reposition/Replace | Use Published Labor Operation Time |
