SERVICE MANUAL UPDATE SEC. 8A KEYLESS PROGRAMMING CONNECTOR

SUBJECT: REVISED KEYLESS PROGRAMMING CONNECTOR LOCATION

MODEL/YEARS: 1992 CUSTOM CRUISER

This bulletin serves to update Service Manual Keyless Entry Connector Locations.

The Keyless Entry Programming Connector on the 1992 Custom Cruiser can be found under the left quarter trim panel.

This description will replace the Keyless Entry Programming Connector Component Location found on page 8A 132-2.

For removal and reinstallment procedures of the left quarter trim panel refer to "Rear Quarters" in Section 10-7 of the 1992 Custom Cruiser Service Manual.

Refer to the illustration below for a component location view. This illustration replaces the diagram on page 9K-2 (Figure 3).

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.