Steering Column Tilt Head Housing - Disassemble - Off Vehicle for Oldsmobile Cutlass 1998

Tools Required

1. Remove the SIR coil assembly. Refer to Inflatable Restraint Steering Wheel Module Coil Disassemble - Off Vehicle .



2. Remove the bearing retainer with J 23653-SIR and the J 42137 and dispose of it.



3. Remove the cam orientation plate (1).
4. Remove the turn signal cancel cam assembly (2).



5. Remove the upper bearing spring (1).
6. Remove the upper bearing inner race seat (2).
7. Remove the inner race (3).



8. Remove the 2 pivot pins using J 21854-01 .
9. Remove the tilt spring assembly only. Refer to Tilt Spring - Disassemble - Off Vehicle .



10. Pull tilt arm to disengage steering wheel lock shoes from the dowel pins in steering column support assembly and remove the bearing and housing assembly.



11. Remove the bearing and housing assembly.