For 1990-2009 cars only
A waterproof, clear plastic deflector is used in order to perform the following functions:
| • | Seal the door inner panel |
| • | Prevent the entry of water |
The deflector is secured to the inner panel with a reusable waterproof adhesive. This allows access as needed to service the door components.
Removal Procedure
Important:
• Use waterproof tape in order to reseal the deflector (1)
if the deflector becomes loose or damaged. • Ensure that the adhesive does not separate from the water deflector.
Install a new water deflector if the adhesive separates from the water deflector
(1).
- Remove the door trim panel. Refer to Door Trim Panel Replacement .
- Remove the door water deflector.
Installation Procedure
- Install the door water deflector (1).
- Ensure that the original fastener holes in the deflector are located in the original positions.
- Ensure that the adhesive is below the door drain slot.
- Install the door trim panel (1). Refer to Door Trim Panel Replacement .
