Power Accessory Switch Panel Replacement for Oldsmobile Cutlass 1999

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable.
2. Remove the power accessory window switch panel (3) from the door (5) by prying the front of the switch with a flat bladed tool.
3. Disconnect the electrical connectors (4) from the switch (3).

1. Connect the electrical connector (4) to the switch (3).
2. Install the switch (3) to the door (5).
3. Ensure the unit is retained.
4. Connect the negative battery cable.