GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1999 🢒 Cutlass 🢒 Body and Accessories 🢒 Roof 🢒 Sunroof Window Height and Opening Fit Adjustment
  1. Slide the sunroof sunshade completely open.
  2. Completely close the sunroof window.

    3. Object Number: 282452 Size: MH
  3. Loosen the adjusting screws (2).
  4. Adjust the corners of the window panel.

    5. Object Number: 282451 Size: MH
  5. Adjust the front of the sunroof window (1) to 1 mm (0.03 in) below the top surface of the roof panel.
  6. Adjust the rear of the sunroof window (3) to 1 mm (0.03 in) above the top surface of the roof panel.

    7. Object Number: 282452 Size: MH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  7. Tighten the adjusting screws (2).

    8. Tighten
    Tighten the adjusting screws to 4 N·m (35 lb in).