GM Service Manual Online
For 1990-2009 cars only
Makes
›
Oldsmobile
›
1999
›
Cutlass
›
Transmission/Transaxle
›
Automatic Transaxle - 4T40-E/4T45-E
› Output Shaft Removal
Search
Output Shaft Removal for Oldsmobile Cutlass 1999
Tools Required
•
J 6125-1B
Slide Hammer with Adapter
•
J 38868
Output Shaft Assembly Remover and Installer
Remove the snap ring (57).
Install the
J 6125-1B
and
J 38868
on the output shaft (94).
Use a screw driver to pry up on the shaft to take up the slack, then pull up on the slide hammer.