REMOVAL OF DRIVER SIDE KNEE BLOSTER (INFORMATION)

APPLICATION: 1994 BUICK CENTURY 1994 OLDSMOBILE CUTLASS CIERAS

SHOULD IT BECOME NECESSARY TO REMOVE THE DRIVER SIDE KNEE BOLSTER FOR ANY REASON, DO NOT ATTEMPT TO REMOVE THE CENTER PIECE (SEE ILLUSTRATION) AS IT IS HOT MELT GLUED TO THE SURROUNDING PANEL AS WELL AS SCREW RETAINED.

FOR KNEE BOLSTER PANEL REMOVAL REFER TO THE 1994 SERVICE MANUAL, SECTION 8C.

FIGURES: 0

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.

COPYRIGHT 1993 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.